All State Air Control
All State Air Control

Maintenance Tips

Keeping your heating and cooling systems in good working order means lower utility bills, additional comfort, and fewer repairs.

Maintenance Scheduling
Schedule a maintenance service before the heating season starts to prevent any problems with your system. It’s better to find out before it’s freezing outside! Do the same for your cooling system before the sweltering season begins.

For the “Do It Yourself-ers”:

Check your heating and cooling air filters every month while they are in use. Operating your system with old, dirty filters means energy is wasted and may even damage your system. Reminder! Check and clean the filters in your home’s air cleaners and humidifiers. 

System Checks

  • Bleed hot water system radiators at least once a year.
  • Don’t keep clutter near your furnace. It’s a fire hazard, and may keep your system from operating efficiently.
  • To make sure you’re getting the most out of your heating system, keep the heating registers and vents throughout the house free of dust, dirt, and pet hair by vacuuming them at least once a year.
  • Listen for odd sounds when your heating or cooling system kicks in. If you hear anything unusual, get in touch with your service professional so you can head off problems before they become serious.

Heating System Checklist

A/C System Checklist

  • Clean & inspect heat exchanger(s), burners, and pilot assemblies
  • Clean or replace filters
  • Lubricate necessary moving parts.
  • Test all safety controls/devices
  • Test voltage of motors
  • Test Amp draw on motors
  • Calibrate thermostat
  • Measure temperature difference
  • Check gas pressure
  • Test in heat cycle

  • Check thermostat operation
  • Clean and adjust automatic controls
  • Check for refrigerant leak (locating leak additional)
  • Lubricate all parts as necessary
  • Check coil temperatures
  • Check blower belt, tension and alignment
  • Replace air filter with high efficient media
  • Inspect and clean condensate pump
  • Check evaporator
  • Clean condenser coil